Liverage Power Meter

The Liverages Meter is mainly used for checking the signal output powerThe Liverages Meter is mainly used for checking the signal output power of the optical communication equipment in fiber optic networks.
It measures the average power of a continuous light beam which is emitted from the equipment or other

optic sources.
It measures power in 850 nm (Multimode) and 1310 nm / 1550 nm (Single mode) respectively.

The Fiber Meter consists of a solid state InGaAs photo diode, signal power measurement circuitry, and a 3 Digits LED display.
Users just connect a fiber cable between the transmission port of the equipment and the universal interface on the Fiber Meter or connect to other light source.
The product will show the exact

amount of the received power (in dBm).

The universal connector can be used for all the most common fiber interfaces such as ST / SC / FC and it is suitable to test both Single mode and Multimode cables.

With an optical 2.5 mm to 1.25 mm adapter, users can even test for 1.25 mm fiber interface.

Download the Liverage official Power Meter APP, and get the IOS support version >= 9.0] mobile phone with Bluetooth could allow consumer to display the function of the Power Meter APP.

Power Meter App functions: Reference functionswitch measurement data for dBm/mWsave testing results and upload to Cloudbattery for Power Meter.Power Meter App functions: Reference functionswitch measurement data for dBm/mWsave testing results and upload to Cloudbattery for Power Meter.,

Page navigation:

• < Prev
• Next >